24/7 Emergency Pump & Well Repair: 705-429-3500

Well Decommissioning & Abandonment in Clearview Township

Professional well decommissioning services for Clearview Township homes, farms, and businesses.

Local to Clearview Township

Based just 10 min away in Stayner. We know the geology and well conditions in your area from decades of experience.

Licensed & Insured

MECP Licensed Well Contractor #C-8303. All work to Ontario Regulation 903 standards with Jeff Mighton (Class 1 & Class 4).

60+ Years Experience

Family-owned since 1964. Trusted by thousands of homeowners, farmers, and businesses across Simcoe County and Grey County.

What to Expect for Well Decommissioning in Clearview Township

When our team arrives at your property in Clearview Township, here's how the process works. Learn more about our full well decommissioning process.

01

Site Assessment & Records Review

We start by pulling the Ontario Well Record for the property if one exists and reviewing the original construction details. On the site visit, we inspect the well, confirm depth and condition, and identify any obstacles such as a stuck pump, collapsed casing, or hidden access challenges. For old wells without records, we assess construction type in person.

02

Written Estimate & Scheduling

We provide a written estimate covering pump and equipment removal, sealing materials and labour, surface restoration, and MECP record filing. The estimate is firm unless we encounter unexpected conditions inside the well, in which case we contact you before any additional work. We schedule the work to fit both your timeline and the seasonal conditions at your property.

03

Pump & Equipment Removal

On work day, our service rig pulls the pump, drop pipe, safety rope, wiring, and any other equipment from the well. We disconnect the pitless adapter, pressure tank, and pressure switch and remove them from the site or set them aside for disposal as you prefer. The well is now ready for sealing.

04

Sealing & Casing Removal

We seal the well from the bottom up using the appropriate approved material — bentonite chips, bentonite grout, or cement-bentonite grout — placed in lifts to ensure continuous contact with the formation. Once the well is fully sealed to surface, the casing is cut at least one metre below grade and either pulled or capped. The surface is backfilled, graded, and restored.

05

MECP Record Filing & Documentation

We file the Well Decommissioning Record with the Ministry of the Environment within the regulated timeframe and provide you with a copy for your property file. This documentation is what real estate buyers, lenders, and severance applications will ask for — keep it with your other property records.

Common Well Decommissioning Issues in Clearview Township

1

Multiple old wells on Clearview farms requiring inventory and decommissioning

Working and former farms across Clearview often have several wells — typically one current household well plus older wells from previous farmhouses, barn operations, or fields. Severance applications, sale, and farm succession planning all routinely require these inactive wells to be decommissioned with MECP records on file.

We inventory all wells on the property using records and site inspection, then decommission the inactive ones as a coordinated package. Per-well cost is typically lower when multiple wells are decommissioned in one mobilization. Records are provided in a format suitable for severance or succession files.

2

Fractured-bedrock wells requiring grout sealing rather than chip placement

Drilled wells in the fractured limestone and dolostone of the Escarpment side of Clearview cannot always be sealed with bentonite chip placement alone — chips can fall through fracture networks rather than building up evenly in the well bore. The result is a seal with potential voids.

For bedrock wells, we use pumped grout placed in continuous lifts from the bottom up. Bentonite grout or cement-bentonite is selected based on the fracture conditions encountered. The grout sets to form a permanent barrier against contamination migration along the well bore.

3

Remote rural access challenges for service rig delivery

Some Clearview properties have long lanes, soft access roads, or limited turnaround space for our service rig. Spring conditions in particular can make some lanes impassable for the equipment needed to perform decommissioning properly.

We assess access during the site visit and schedule the work for conditions that support the equipment — typically summer through early fall, or winter on properties where frozen ground supports the rig on otherwise soft sites. For properties with very limited access, we can sometimes mobilize smaller equipment.

Time Clearview Decommissioning for Dry-Ground Conditions

For rural Clearview properties with long lanes or soft access roads, schedule decommissioning for the dry months — typically late June through early October. Spring runoff and wet fall conditions can make some lanes impassable for our service rig and add cost or delay to the project. Winter is fine on properties where frozen ground supports the equipment; we work year-round with the timing adjusted to site conditions.

Need Well Decommissioning in Clearview Township?

Call us for a free phone consultation or request a site visit. We're your local experts.

Well Decommissioning in Clearview Township: Frequently Asked Questions

My Clearview farm has at least four old wells. How does multi-well decommissioning work?
We start with a property-wide inventory using Ontario Well Records and a walkthrough. Each well is assessed in person — construction type, depth where known, condition. We then provide a written estimate covering all wells as a package. Doing the work in one mobilization is more efficient than separate calls, so the per-well cost is often lower.
Why does a bedrock well need different sealing material than a sand well?
Sealing materials are matched to the formation. Sand wells seal well with bentonite chip slurry — the chips swell on contact with water and build up evenly. Bedrock wells with fractures can let chips fall through into the fracture network rather than sealing the well bore, so we use pumped grout that flows under pressure and fills the bore and immediate fracture intersections. Reg. 903 specifies acceptable materials for each formation type.
What happens to the casing during a Clearview well decommissioning?
After the well bore is fully sealed, the steel casing is cut at least one metre below grade. Depending on the project, the cut section is either pulled to the surface or left in place and capped. The remaining buried section is sealed at the top. The surface is then backfilled and restored.
How do I prove decommissioning was done if the buyer asks?
The MECP Well Decommissioning Record is the official documentation. We file it with the Ministry within the regulated timeframe and provide you with a copy. Real estate lawyers, lenders, and buyers asking about the property will accept the MECP record as proof of compliance. We retain copies and can reissue them later if needed.
Can severance applications be approved before decommissioning is done?
It depends on the municipality and the conditions of the severance. Some severance approvals require decommissioning to be complete as a condition of final approval; others allow it to be completed before lot transfer. We are familiar with Clearview Township's typical requirements and can coordinate timing with your planning consultant or lawyer.

Other Services We Provide in Clearview Township

Beyond well decommissioning, we offer a full range of well and water services in Clearview Township:

We Also Provide Well Decommissioning in Nearby Areas

Serving communities across Simcoe County and Grey County from our home base in Stayner.

Serving Clearview Township and Surrounding Areas

Ready to Get Started in Clearview Township?

Contact our experienced team for a free consultation and estimate. Over 60 years of trusted service.